Pineapple Tenor Ukulele — Beginner Build Class

resources

Watch: build a pineapple tenor at home

A first-time builder making a pineapple tenor ukulele from scratch using the Oaktown Strings plan — a great way to see the whole process before we start. The same channel also has a longer full-length version and a step-by-step playlist.

Watch on YouTube

Tonewood FAQ

Which top wood should you choose — spruce, koa, or khaya? How much does wood choice actually matter? A student FAQ with a detailed comparison table: density, stiffness, stiffness-to-weight, what each wood sounds like, and tenor top-thickness targets.

Read the Tonewood FAQ

Oaktown Strings reference guides

Reference material from Oaktown Strings (archived) — the guides and full-size plan our build is based on. Our class simplifies a few things along the way, so where a class handout differs from these guides, follow the handout.

  1. Pineapple Tenor Ukulele Plan v1.3 The full-size plan by Robert Lattuga (2020) — body outline, bracing layout, and key dimensions.
    Download PDF
  2. Body Construction Oaktown Strings guide to building the ukulele body, step by step.
    Download PDF
  3. Build the Neck Oaktown Strings guide to neck construction. (Our class uses a supplied neck and a simple dowel joint instead.)
    Download PDF
  4. Finishing and Set Up Oaktown Strings guide to finishing the instrument and final setup.
    Download PDF

StewMac Ukulele Kit Instructions

StewMac's assembly instructions for their ukulele kits (sheet I-5351) — a useful general reference for the build sequence, and the source of the clamp-and-caul top-brace glue-up in the Session 3 handouts. Note that StewMac's kit differs from our class build (different bracing pattern, different glue), so where a class handout differs from these instructions, follow the handout.

View on StewMac

Laser-cut templates (LightBurn)

LightBurn files for making class templates on the laser cutter. The zip contains six files: back, bridge plate, side template, top, top brace profiles, and top bridge placement. Open them in LightBurn and cut to the settings in each file.

Download templates (.zip)