Brace-planing jig
Milled from a single block of hardwood. The block plane rides sole-down on the terrace while the brace blank lies in the center channel; the blade cuts the blank flush with the terrace. The channel is milled for the thickest stock (3/8″) with no shim — thinner parts get a shim under the blank (shim = 3/8″ − target: 5/32″ for fan-brace height, 1/8″ for transverse-brace width, 1/4″ for fan-brace width). Width passes run with the blank stood on edge; a bench-hook cleat under the open (user) end hooks the bench edge. Used in Session 1 for every top-brace part.
The jig as built and tested in the instructor's shop — spruce blank in the channel, shavings and all.
Explore the model
Drag to rotate, scroll to zoom. Toggle parts, explode the assembly, or hide the plane from the panel. The model matches the tested build in the photo above — milled block, shim set, and bench-hook cleat.